Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Industrial Relay/UniversalDescription: 1SBL367001R1300 - ABB Contactor AF52 series, 3 normally open contacts 3P, 100 A, 100 → 250 V AC/DC coil71761+$633.955110+$611.711150+$608.9306100+$606.1501150+$601.7013250+$597.8086500+$593.91591000+$589.4671 -
![]()
Category: Industrial Relay/UniversalDescription: Auxiliary contact block is used for vertical installation on the front or side of contactor series A9 to A110. Note that it is only suitable for use with A-series contactors. ABB contactors99861+$68.480210+$65.5028100+$64.9669250+$64.5500500+$63.89501000+$63.59732500+$63.18045000+$62.8231 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series32171+$1602.517410+$1587.949125+$1580.664950+$1573.3807100+$1566.0966150+$1558.8124250+$1551.5282500+$1544.2440 -
![]()
Category: Industrial Relay/UniversalDescription: AF26 3Pole Contactor; 17A; 11kW; 130V dc Coil16571+$480.681610+$468.142150+$458.5284100+$455.1846200+$452.6767500+$449.33281000+$447.24292000+$445.1530 -
![]()
Category: Industrial Relay/UniversalDescription: Auxiliary switch for S200 series ### S 2C-H6R, signal contact / auxiliary switch Retrofittable on right to S200 / S 200 M / S 200P series circuit breakers ### S2-H11 / H20 / H02, auxiliary switch Retrofittable on left to RCCBs and F271 / S260, S270, S280 series circuit breakers Switching capacity: | ---|--- \- S 2C-H6R | AC 14: 230 V / 2 A DC 12: 110 V / 1.5 A DC 13: 24 V / 4 A \- S2-H11 / H20 / H02 | AC 14: 230 V / 6 A DC 12: 110 V / 1.5 A DC 13: 24 V / 4 A Connection cross-section: | 0.75 → 2.5 mm² Mechanical life : | 10,000 switching cycles Stock no. | Type | Brief description | Manuf. Part no. ---|---|---|--- 488-7384 | 1W | S 2C-H6R | 2CDS 200 912 R0001 455-5829 | 1 NCC + 1 S | S2-H11 | GHS2 701 916 R0001 460-1499 | 2 S | S2-H20 | GHS2 701 916 R0002 460-1506 | 2 NCC | S2-H02 | GHS2 701 916 R0003 ### ABB Attachment # # # Note: These contacts cannot be used with ESB20 type installation contactors, and can only be used with higher types such as ESB24 type installation contactors10931+$201.511110+$196.254250+$192.2240100+$190.8222200+$189.7708500+$188.36901000+$187.49292000+$186.6168 -
![]()
Category: Industrial Relay/UniversalDescription: Thermal Overload Relay TF range up to 38 Amps Overload protection class 10 but does have a adjustable setting Phase loss sensitivity Automatic or manual reset selectable STOP and Test function Temperature consumption -25 → +60 °C ### ABB AF series66651+$261.312210+$254.495450+$249.2691100+$247.4513200+$246.0879500+$244.27011000+$243.13402000+$241.9978 -
![]()
Category: Industrial Relay/UniversalDescription: AF The contactor relay is an AC/DC operated AF09-AF38 contactor relay that includes an electronic coil interface that accepts a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF-Z contactor relay is equipped with a Z-shaped coil, allowing direct control through 24 V DC, 500 mA PLC output, reducing fixed coil consumption. The AF-Z contactor relay can withstand short-term drops and voltage interruptions (compliant with SEMI F47). The AF contactor relay has built-in surge protection and does not require any additional surge suppressors. The contactor relay has mechanical connection contact components that comply with the IEC 609947-5-1 Annex L standard, and the side includes the mechanically linked symbol # # # standard IEC 60947-5-1 and EN 60947-5-1, UL 508, CSA C22.2 N 14 # # # ABB AF series42641+$272.247610+$265.145450+$259.7005100+$257.8066200+$256.3862500+$254.49231000+$253.30862000+$252.1249 -
![]()
Category: Industrial Relay/UniversalDescription: AF The contactor relay is an AC/DC operated AF09-AF38 contactor relay that includes an electronic coil interface that accepts a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF-Z contactor relay is equipped with a Z-shaped coil, allowing direct control through 24 V DC, 500 mA PLC output, reducing fixed coil consumption. The AF-Z contactor relay can withstand short-term drops and voltage interruptions (compliant with SEMI F47). The AF contactor relay has built-in surge protection and does not require any additional surge suppressors. The contactor relay has mechanical connection contact components that comply with the IEC 609947-5-1 Annex L standard, and the side includes the mechanically linked symbol # # # standard IEC 60947-5-1 and EN 60947-5-1, UL 508, CSA C22.2 N 14 # # # ABB AF series51361+$316.937710+$308.669850+$302.3310100+$300.1262200+$298.4726500+$296.26791000+$294.88992000+$293.5119 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series24341+$484.014310+$471.387850+$461.7076100+$458.3405200+$455.8152500+$452.44821000+$450.34372000+$448.2393 -
![]()
Category: Industrial Relay/UniversalDescription: VB6/VB7 - Compact Rreversing Contactors The mechanical lock between the two contactors prevents one of the contactors from switching on, as long as the other is still switched on and vice versa. Switching over reversing contactors too quickly poses the risk of a phase short circuit. This is the case if the arc of the contactor switching off has not yet extinguished and the contacts of the contactor switching on are already closed. To avoid this risk, the two contactor coils must be switched to idle for a minimum of 50 ms during the switchover process and electrically locked against each other. Technical specifications --- Rated operating voltage: | 220 to 240Vac Mechanical lifespan: | 10 m switching cycles Ambient temperature: | -25°C to +55°C Selection guide --- Type | Auxiliary switch | Motor rating (AC2/3) | Motor rating (AC2/3) | | 220/240V | 380/440V VB 6-30-10 | 1 NO | 2.2 kW | 4kW VB 6-30-01 | 1 NC | 2.2 kW | 4kW VB 7-30-10 | 1 NO | 3kW | 5.5kW VB 7-30-01 | 1 NC | 3kW | 5.5kW ### ABB contactor22621+$723.433710+$698.050150+$694.8771100+$691.7042150+$686.6275250+$682.1853500+$677.74321000+$672.6665 -
![]()
Category: Industrial Relay/UniversalDescription: Auxiliary Contacts S-2C Series Indication of the position of the devices contacts Suitable for S 200 Series MCBs, F 200 Series RCCBs and DS 200 Series RCBOs ### ABB Attachment # # # Note: These contacts cannot be used with ESB20 type installation contactors, and can only be used with higher types such as ESB24 type installation contactors20021+$131.888910+$128.448350+$125.8105100+$124.8931200+$124.2049500+$123.28751000+$122.71402000+$122.1406 -
![]()
Category: Industrial Relay/UniversalDescription: CM-SRS Current monitoring, single-phase AC/DC, according to configuration, current monitoring relays CM-SRS 1 and CM-SRS. 2 can be used in single-phase AC and/or DC systems to monitor overcurrent or undercurrent. The current to be monitored (measured value) will be applied to terminal blocks B1/B2/B3-C. The device operates based on the open circuit principle. If the measured value exceeds the response and drops below the adjusted threshold, the output relay will be powered on: CM-ESS. 1 will be powered on immediately, and CM-ESS. 2 will be powered on after the set trigger delay TV. Monitoring DC and AC currents: CM-SRS.x1: 3mA-1A and CM-SRS.x2: 0.3-15A Effective value measurement principle One device includes 3 measurement ranges configurable overcurrent or undercurrent monitoring Hysteresis adjustable range: 3-30% disconnect delay TV adjustable range: 0.1-30s CM-SRS.1:1 c/o contacts CM-SRS.2:2 c/o contacts 22.5mm width 3 LED status indication # # ABB CM series51011+$1682.162910+$1666.870525+$1659.224350+$1651.5781100+$1643.9319150+$1636.2857250+$1628.6395500+$1620.9933 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series2738 -
![]()
Category: Relays and accessoriesDescription: ABB AF series66631+$609.026810+$587.657450+$584.9862100+$582.3151150+$578.0412250+$574.3016500+$570.56191000+$566.2880 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series3388 -
![]()
Category: Relays and accessoriesDescription: ABB AF series22761+$208.085610+$202.657350+$198.4956100+$197.0480200+$195.9624500+$194.51481000+$193.61012000+$192.7054 -
![]()
Category: Industrial Relay/UniversalDescription: CM-IWS - The CM-IWS series of insulation monitoring relays can monitor insulation resistance and are configured to meet application requirements. All devices have two different versions of terminal blocks: screw connection technology and easy connection technology. The device can monitor the control circuit (single-phase) and power circuit (3-phase) with a measurement range of 1-100 k Ω. The threshold can be accurately adjusted in increments of 1k Ω. The interrupt wire detects 3 operating states, LED indicators, 1 c/o (SPDT) contacts, and the principle of closed circuit46361+$2421.523510+$2399.509725+$2388.502750+$2377.4958100+$2366.4889150+$2355.4820250+$2344.4750500+$2333.4681 -
![]()
Category: Industrial Relay/UniversalDescription: CM-SRS Current monitoring, single-phase AC/DC, according to configuration, current monitoring relays CM-SRS 1 and CM-SRS. 2 can be used in single-phase AC and/or DC systems to monitor overcurrent or undercurrent. The current to be monitored (measured value) will be applied to terminal blocks B1/B2/B3-C. The device operates based on the open circuit principle. If the measured value exceeds the response and drops below the adjusted threshold, the output relay will be powered on: CM-ESS. 1 will be powered on immediately, and CM-ESS. 2 will be powered on after the set trigger delay TV. Monitoring DC and AC currents: CM-SRS.x1: 3mA-1A and CM-SRS.x2: 0.3-15A Effective value measurement principle One device includes 3 measurement ranges configurable overcurrent or undercurrent monitoring Hysteresis adjustable range: 3-30% disconnect delay TV adjustable range: 0.1-30s CM-SRS.1:1 c/o contacts CM-SRS.2:2 c/o contacts 22.5mm width 3 LED status indication # # ABB CM series70421+$1719.615710+$1703.982825+$1696.166450+$1688.3500100+$1680.5335150+$1672.7171250+$1664.9007500+$1657.0842 -
![]()
Category: Industrial Relay/UniversalDescription: CM-EFS Voltage Window Monitoring Relay - Single phase AC/DC Voltage Window Monitoring Relay CM-EFS. 2 can be used in single-phase AC and/or DC systems to simultaneously monitor overvoltage (>U) and undervoltage (__ the monitored voltage (measured value) is applied to terminal B-C. The device can be configured with open or closed circuit principles and adjustable on/off delay monitoring for effective values of DC and AC voltages ranging from 3-600V. One device includes four measurement ranges: 3-30V, 6-60V, 30-300V, and 60-600V. Overvoltage and undervoltage monitoring can be configured with on/off delays. The open or closed circuit principles can be configured with locking functions. The threshold for Umin and Umax can be adjusted by 5%. Fixed hysteresis disconnection delay. TV adjustable range: 0; 0.1-30s 1x2 closed/open contacts (universal signal) or 2x1 closed/open contacts (Umin and Umax use independent signals) 22.5mm width 3 LED status indication # # # ABB CM series77281+$2196.888110+$2176.916425+$2166.930550+$2156.9447100+$2146.9588150+$2136.9730250+$2126.9871500+$2117.0013 -
![]()
Category: Industrial Relay/UniversalDescription: CM-SFS Current monitoring relay, 1-bit AC/DC current window monitoring relay CM-SFS. 2 can be used to simultaneously monitor overcurrent and undercurrent in single-phase AC and/or DC systems. Two closed/open contacts can be configured to work together (bipolar conversion) or independently (2x unipolar conversion) for overcurrent and/or undercurrent conditions... The current to be monitored (measured value) will be applied to terminal block B1/B2/B3-C. Can be configured with open or closed circuit principle and adjustable on/off delay monitoring for DC and AC currents: CM-SFS. 21:3mA-1A and CM-SFS. 22:0.3-15A. Effective value measurement principle: One device includes 3 measurement ranges for overcurrent and/or undercurrent monitoring. Can be configured with on/off delay and open or closed circuit principle. Can be configured with locking function, adjustable threshold for Imin and Imax. 5% fixed lag startup delay. TS adjustable range: 0; 0.1-30s disconnect delay TV adjustable range: 0; 0.1-30s 1x2 closed/open contacts (universal signal) or 2x1 closed/open contacts (Imin and Imax use independent signals) 22.5mm width 3 LED status indication # # # ABB CM series32381+$2078.843810+$2059.945225+$2050.495950+$2041.0466100+$2031.5974150+$2022.1481250+$2012.6988500+$2003.2495 -
![]()
Category: Industrial Relay/UniversalDescription: AF09 3Pole Contactor, 7A, 4kW, 500VDC Coil78491+$319.512610+$311.177450+$304.7872100+$302.5645200+$300.8975500+$298.67481000+$297.28562000+$295.8964 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series88521+$2586.758910+$2563.242925+$2551.484950+$2539.7269100+$2527.9689150+$2516.2109250+$2504.4529500+$2492.6949 -
![]()
Category: Industrial Relay/UniversalDescription: AF16Z 3Pole Contactor, 10.5A, 7.5kW, 60V dc Coil52541+$570.370510+$550.357550+$547.8559100+$545.3543150+$541.3517250+$537.8494500+$534.34711000+$530.3445 -
![]()
Category: Industrial Relay/UniversalDescription: ABB AF16-40-00-14 Contactor, 500V, 4Pole, 4NO, DIN Rail, 30A, 500V52831+$487.905910+$475.177950+$465.4198100+$462.0257200+$459.4801500+$456.08601000+$453.96462000+$451.8433 -
![]()
Category: Industrial Relay/UniversalDescription: CM-MSS The CM series electric heating regulator motor protection relay is used to control motors equipped with PTC temperature sensors. The motor coil contains a PTC temperature sensor to measure the heat generation of the motor. This can directly control and evaluate the following working conditions: increased switching frequency during heavy load start-up, high ambient temperature, insufficient heat dissipation, and imbalanced breakpoint operation. The main functions include: dynamic interruption, wire detection, wide control power supply voltage range of 24-240 V, short circuit monitoring of AC/DC sensor circuits, non-volatile fault storage, remote reset, providing screw connection technology or easy connection technology, single sensor input type wire break detection technology specifications - manufacturer part number | voltage | output | manual reset | remote reset | test button | inventory number 1SVR430800R9100 | 24V AC/DC | 1 NO | No | No | No | 464-518 1SVR430801R1100 | 220-240V AC | 1 NO | No | No | 464-520 1SVR430810R1100 R9300 | 24V AC/DC | 2CO | Yes | Yes | No | 464-570 1SVR430811R0300 | 110-130V Communication | 2CO | Yes | Yes | No | 464-574 1SVR430811R1300 | 220-240V AC | 2CO | Yes | No | 464-568 1SVR430711R0300 | 110-130V AC | 2CO | Yes | Yes | Yes | 464-564 1SVR430711R2300 | 380-440V AC | 2CO | Yes | Yes | 464-558 1SVR430720R0400 | 24-240V AC/DC | 1NO 1NC | Yes | Yes | 464-552 1SVR430720R0300 | 24-240V AC/DC | 2CO | Yes | Yes | 464-546 # # # # Some products are also recognized by ATEX X certification, used in hazardous areas. ###ABB CM series3376 -
![]()
Category: Industrial Relay/UniversalDescription: AF The ABB series AF contactor is mainly used for switching 3-phase motors and controlling power circuits up to 690V AC or 440V DC. They are also suitable for various other applications, such as insulation, switching capacitors, and lighting systems. The AF series 3-pole contactor provides various coil voltage and current ratings, and has built-in auxiliary contacts. Easy to maintain contact and coil inspection DIN rail or screw installation Touch safety design separately provided with additional auxiliary contact blocks and thermal overload relays # # ABB contactors20901+$3085.393310+$3057.344325+$3043.319850+$3029.2952100+$3015.2707150+$3001.2462250+$2987.2217500+$2973.1972 -
![]()
Category: Industrial Relay/UniversalDescription: CM-IWS - The CM-IWS series of insulation monitoring relays can monitor insulation resistance and are configured to meet application requirements. All devices have two different versions of terminal blocks: screw connection technology and easy connection technology. The device can monitor the control circuit (single-phase) and power circuit (3-phase) with a measurement range of 1-100 k Ω. The threshold can be accurately adjusted in increments of 1k Ω. The interrupt wire detects 3 operating states, LED indicators, 1 c/o (SPDT) contacts, and the principle of closed circuit81811+$2270.919210+$2250.274525+$2239.952150+$2229.6298100+$2219.3074150+$2208.9850250+$2198.6627500+$2188.3403 -
![]()
Category: Industrial Relay/UniversalDescription: ABB AF26-30-00-13 Contactor, 250V, 3Pole, 3PST-NO, DIN Rail, 45A, 250V93121+$401.425910+$390.953950+$382.9254100+$380.1329200+$378.0385500+$375.24601000+$373.50062000+$371.7553 -
![]()
Category: Industrial Relay/UniversalDescription: AC2；AC3 Rated coil power: 3.5VA, 3.5W (closed and held) Switching times: 14 to 26/16 to 40ms # # # ABB MS116 series83161+$116.619210+$113.577050+$111.2446100+$110.4333200+$109.8249500+$109.01361000+$108.50662000+$107.9995 -
![]()
Category: Industrial Relay/UniversalDescription: AF Contact blocks used together with contactors should be installed on the front or side, with screw type connection terminals # # # Standard UL 508, CSA C22.2 N14 # # # ABB AF series60171+$154.752110+$150.715050+$147.6200100+$146.5435200+$145.7361500+$144.65951000+$143.98672000+$143.3139
